Welcome

Thanks for visting! The table of contents are on the right. Archives for this blog are located at the bottom of the page.







Monday, August 20, 2012

Overhead Console- (Rough) Installation

Just a rough fitment here. I drilled (8) 3/16" holes, 4 per side for mounting it to the roof. I'm going to use a stainless steel machine bolt.


Sorry for the crooked picture, I had to lean over the spare tire. All folded up this measures in at 10"x22".
This is a good view of the side slots that will house the red rope lights.




Tomorrow I will center this as well as I can and drill the holes in the roof. The pull it down, drill and mount the LED interior lights, rope lights, paint it black and reinstall it.