Welcome

Thanks for visting! The table of contents are on the right. Archives for this blog are located at the bottom of the page.







Thursday, October 7, 2010

Traction Bar-Final Install

Wrapped around the axle to prevent the mount from busting loose.

Change the design to a high clearance design. 1.25" .120 wall DOM

Body mount. We had to push the floor pan up a bit to accomodate the height of the shackle. Gusseted across the back.

David welded a 5 " piece of DOM into the frame. Tapped it and now the shackle has something to thread into.